Introducing NexusDBP · Digital Building Permits

AI guides the application. The engine decides.

NexusDBP takes a building permit from the first question to the issued permit. An AI assistant guides applicants through every step, and a deterministic compliance engine checks BIM models, 2D drawings and the site against the building code. Same data, same result, every time.

6
Guided steps
3D + 2D
Models and drawings
100%
Traced to the code
The NexusDBP home: the assistant asks what you would like to check today
Built on open standards: IFC 2x3 / IFC4 IDS BCF PDF · DWG · DXF OGC API · WMS · WFS MCP
Platform Tour

See NexusDBP in three minutes

From the first question to the issued permit: the assistant, the six steps, the checks, the BIM viewer, issues, the site, 2D drawings, the rule builders and the integrations.

AI-first, from the first question Deterministic checks BIM models and 2D drawings Ready to integrate
Core Capabilities

The whole permit, in one platform

Applicants, reviewers and the people who maintain the building code work in one place. Every result points to the code section it comes from.

AI Assistant

Ask a question, drop your files, or let it guide the whole application. It explains failures in plain words and starts uploads and checks for you.

Guided Application

Six steps from project info to submission: models and drawings, data quality, site and spatial checks, building checks, summary and submit.

Data Validation (IDS)

Every model is validated against the IDS of its code set first. Missing data shows up as missing, never as a false failure.

Deterministic Compliance Engine

Every rule and calculation of the code set runs on the model. Each run records the engine version, the models and the code set, so it can be repeated.

BIM Viewer: 3D, 2D, Split

Failed elements light up in 3D, or on floor plans cut from the model itself, level by level, side by side with the 3D view.

Issues on the Model

Raise an issue on the model with its elements, view, markup and snapshot. Reopen it later and the same view comes back.

Site & Spatial Checks

Setbacks, height, coverage, floor area ratio and utility connections, checked against live GIS services on a 3D map of the parcel.

2D Drawing Checks

PDF, DWG or DXF sheets are classified, scaled and read: dimensions, tags, schedules and sections. An unclear reading goes to review, never to fail.

Structural Review

ETABS and SAFE packages are read and placed on the model, with our own plausibility checks and estimates of the results.

Rule Builders

Describe a rule in plain words and AI drafts it, or build it yourself: visual, diagram, SQL, spatial and 2D drawing rules. A person approves every rule.

Code & Check Catalog

Building codes by chapter and section, checks with versions, and code sets per permit type. Every check is pinned to a section of a code.

Summary & Submission

Justify a failure where one is still needed, see the required documents, preview the compliance report and submit. The files and results are locked once submitted.

Decisions You Can Trust

AI assists. The engine decides.

Each rule always returns the same result when faced with the same data: no inconsistencies and no hallucinations.

What AI does

Guides, explains, drafts

  • Guides the application and tells you what to do next on every step
  • Explains the failures of a run in plain words
  • Drafts rules from a plain-words requirement, for a person to approve
  • Runs on the models you choose, local or frontier, under your data policy

What the engine does

Decides every pass and fail

  • Runs every published rule and calculation of the code set
  • Same model, same code set, same result, every time
  • Points every pass and fail to a code section and a versioned rule
  • Keeps the GIS data it read with the run, so the result can be reproduced

AI never decides a pass or a fail. The parcel and the zoning come from GIS, not from AI.

AI-first

Start with a conversation, not a form.

The assistant is the front door: ask a question, drop your files, or let it guide the whole application. It fills in the application as you answer, then creates the project and takes you to step one.

Guided on every step

It says what to do next and starts uploads and checks for you. Prefer the buttons? They are all there.

Parcel and zoning from GIS

The parcel, the zoning and the district are read from the authority's GIS services, not guessed.

The right documents

It knows which documents each permit type needs, straight from the authority's own configuration.

Your choice of model

Frontier APIs or self-hosted models, routed per task. Data that must stay local can be kept on local models.

The assistant drafting a permit application as the applicant answers
Step 5, building checks: passed, failed and not applicable checks with their code references
Automated Checks

Deterministic compliance checks.

Every rule and calculation of the code set runs on the model. Same model, same code set, same result, every time. The assistant explains the failures in plain words; the engine decides them.

Missing data, caught first

Models are validated against the IDS of the code set before any check runs. Failing elements export as BCF for the authoring tool.

Repeatable runs

Each run records the engine version, the model versions and the code set, with its history kept per project.

Traceable results

Every pass and fail points to a code section, with the elements it applies to, one click from the BIM viewer.

Fix first, justify the exception

Fix the model and re-upload; justify a failure only when it is the exception. The reviewer decides on every justification.

BIM Viewer

Every result, on the model.

Failed elements light up in 3D, straight from the check results. Or on floor plans cut from the model itself, level by level, side by side with the 3D view.

3D, 2D or Split

Pick a result and the plan moves to the level that holds it, while the 3D view frames the same elements.

Measure, note, cut

Measurements and notes on the plan, a section box in 3D, and a model browser with every property.

Structural results

ETABS and SAFE packages are read and placed on the model, coloured by utilisation, with our own plausibility checks and estimates of the results.

Export as BCF

Take the results back to the authoring tool as a BCF file.

The BIM viewer in Split view: a floor plan cut from the model next to the 3D view, failed windows in red
Failed windows highlighted in red on the 3D model Structural results on the model, coloured by utilisation
The issue list next to the floor plan, the issue's measurement shown on the plan
Issues

Raise it on the model.

Frame the view in 3D, 2D or Split, measure and add notes. The snapshot is taken for you. Open the issue later and the same view comes back, down to the measurement on the plan.

Snapshot, elements and markup

Each issue keeps its elements, its view, its markup and the snapshot.

Assigned and tracked

Type, priority, status, assignee, due date, comments and attachments.

One list for the project

Everyone on the project sees the same issues, each one linked to its elements on the model.

Site and Spatial

Your model, on its parcel.

Setbacks, height, coverage and utility connections, checked against live GIS services, on a 3D map with the parcel, the zoning and the networks around it.

Placed from the IFC site

The model sits on its parcel, with the neighbouring buildings and terrain around it.

Measured on the map

Each failed check shows its measurement on the site: the setback, the height, the distance to the manhole.

Reproducible

The GIS data is read at check time and stored with the run, so the result can be reproduced later.

The site viewer: the model on its parcel with setback lines, utility networks and the site checks
A ground floor plan with a failing door width marked on the sheet
2D Drawings

Using 2D drawings only? Don’t worry, we got you.

Many engineers out there are still using 2D drawings. You can check the building code compliance even on top of your 2D drawings.

PDF, DWG or DXF

Sheets are classified and scaled from the title block: plans, sections, elevations, details and schedules.

Read, then checked

Dimensions, tags and schedules are read, and the checks run on what is read: a door width on the plan, a stair riser on the section.

Review, never a false fail

An unclear reading goes to review, never to fail. Results are marked on the sheet itself.

Rule Builders

Write rules your way.

Describe the rule in plain words and AI drafts it, as a visual rule and as SQL. A person approves; the engine runs it without AI. Or build it yourself.

AI rule builder

From the requirement to a draft rule, checked against a real model before anyone publishes it.

Visual and diagram builders

Element sets, filters and conditions, as a form or as nodes in a diagram. Nodes in, SQL out.

SQL, spatial and 2D drawing rules

Calculations in SQL, rules against GIS layers, and rules that read 2D drawing sheets.

One catalog, versioned

Every check is pinned to a section of a building code, published in versions, and grouped into code sets.

The AI rule builder drafting a door width rule from a plain-words requirement
Impact

What NexusDBP brings

For the authority, a review that starts from facts. For the applicant, no surprises at submission.

Faster permits
Checks in minutes, not weeks of manual review.
Decisions you can trust
The same result for the same data: no inconsistencies and no hallucinations.
Traceable results
Every pass and fail points to a code section and a versioned rule.
Clear for applicants
Know what is needed, and what is missing, before you submit.
Inside the Platform

Every screen, built for the job

Click a screen to see it full size.

Built for Teams

One platform for everyone on a permit

Each role sees exactly what it needs, inside the authority's own organisation.

Applicant

Creates projects, uploads files, runs checks, justifies failures and submits

Reviewer

Reviews submissions, accepts or rejects justifications, logs issues and issues decisions

Code Manager

Maintains building codes, checks, IDS and code sets, and publishes check versions

Organisation Admin

Users, permit types, GIS services, AI models, MCP and deployment settings

AI agents work through the MCP server with the same permissions as the person who connected them.

Use Cases

Who NexusDBP is for

From a single house to a public building, from a 2D drawing set to BIM models per discipline.

Building Authorities & Municipalities

Receive complete applications, review from the engine's results instead of from scratch, and issue decisions that point to the code.

E-permitting Review Code sets

Architects & Designers

Check the design against the code before you submit, fix what fails in your own tool, and justify only the exceptions.

BIM 2D drawings BCF

Structural & MEP Engineers

Submit the ETABS or SAFE package with the model, see the results placed on it, and the plausibility checks next to them.

ETABS SAFE Utilities

Code Managers & Regulators

Turn the building code into versioned, testable checks, with AI drafting and people approving, and publish them per permit type.

Rule builders IDS Versioning
Open Platform

Ready to integrate.

Your AI models, your agents, your GIS services and your sign-in: NexusDBP connects to what the authority already runs.

AI Models

Local or frontier, routed per task under your data policy. AI never decides a pass or a fail.

AnthropicOpenAIAzure OpenAIGoogle GeminiMistralLM StudioOllamavLLM

MCP Server

Your agents run checks and read results with your permissions. A person confirms every submission in NexusDBP.

14 toolsStreamable HTTPOAuth 2.1Access tokens

GIS Services

Parcels, zoning, roads, utility networks and height limits, read live at check time and kept with the run.

ArcGISOGC APIWMSWFS3D Tiles

Your Own Sign-in

People sign in with the authority's directory, and its groups map to NexusDBP roles.

Microsoft Entra IDADFSKeycloakActive Directory (LDAPS)

Open Formats

Models, data requirements and issues in buildingSMART standards; drawings as they are produced today.

IFCIDSBCFPDFDWGDXF

Structural Packages

Read from the engineer's own analysis files and placed on the model, with plausibility checks next to them.

ETABS .e2kSAFE .f2k
Organisation and deployment: an on-premises installation with its nodes, licence and sign-in
Deployment

SaaS or on-premises. The same product.

Run NexusDBP as a service, or install it in the authority's own data centre. Only who runs it changes.

SaaS

Hosted and run by INS, with the authority as its own organisation and its own sign-in.

On-premises

Installed with Docker Compose on the authority's servers, with an offline licence: no internet access needed, no call home.

Local AI, if you want it

Self-hosted language models on the authority's own GPU servers, so no document has to leave the building.

See NexusDBP in action

Book a walkthrough with your own code set, models and drawings, and see how NexusDBP takes a permit from the first question to the issued permit.